IntelliTrack Package Track - Manual (Page 78)

I NTELLI T RACK DMS: P ACKAGE T RACK V 8.1
User Manual
64
3. If password security is enabled in the workstation application, you may
send password security to the Batch Portable application, per your set-
tings in the Batch Synchronization Utility\Send Data tab.
4. When you send data to the handheld device from the Batch Synchroni-
zation Utility, your sync config files along with the data are sent to the
handheld device.
Note: For data synchronization to occur between the workstation appli-
cation and the batch portable application via ActiveSync or Windows
Mobile Device Center Software, the handheld device must already be in
the cradle.
Sending Data to the Batch Portable Application
The Send Data tab of the Main form in the Batch Synchronization Utility
provides for sending the sync config files and the workstation application
data to the Batch Portable application. The Send Data tab contains two
selections: Send Packages By and Send Recipients By. To send down-
loaded data to the Batch Portable Application, please follow the steps
below.
1. From the DMS Batch Synchronization Utility, click the Send Data tab
in the Main form to bring this portion of the form to the front.