Teledyne LeCroy WavePro Automation Command - Manual (Page 19)

Automation Command and Query Reference Manual - Control Reference
SetToDefaultSetup Action
Restores the instrument setup to its default state. Note that certain settings will not be restored to the
default state. These are the user preferences, such as the current remote communications port, and
the color settings, which may be reset, if required, using the ResetPreferences action.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Restore the instrument to its default state.
app.SetToDefaultSetup
Example
Shutdown Action
Shuts down the instrument. It will prompt the user with an 'Are you sure?' dialog before shutting down.
Note that until the user responds to the dialog, control via Automation will be blocked.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Shut down the instrument with a confirmation prompt.
app.Shutdown
Example
Sleep([in] double timeoutMilliseconds) Method
Causes the main execution thread of the instrument application to sleep for the specified time period,
defined in milliseconds.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
MsgBox "Sleeping for 10 seconds..."
app.Sleep(10000)
MsgBox "Sleep finished"
Example
Top Property
Sets/Queries the position in pixels of the top edge of the instrument display on the PC screen. The
position is measured downwards from the top of the screen to the top of the instrument window.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the position of the top edge of the instrument window to 100 pixels.
app.Top = 100
Example
1-5
918501 RevA