Teledyne LeCroy WavePro Automation Command - Manual (Page 389)

Automation Command and Query Reference Manual - Control Reference
SignalType Enum
This control selects the predefined signal type of the input signal. If the input signal isn't any of the
predefined types, select "Custom". If the input signal is a clock, select "Clock". This list is defined in
a couple of external databases, in D:\Masks. We add to that list as new standards are released, it is
likely to have more entries than you see listed below. For example, we know we will soon add USB3
and PCIe 3.0 at 8Gb/s. Please look on your scope to see what choices are available.
When this is set to a known signal type, the bit rate is set to nominal for that standard; the allowed
choices of defined masks is set; and, for PCIE, some PCIE CEM spec defined choices of PLL
settings are allowed.
Custom does not have any defined masks or a known nominal data rate. So, for Custom you must
find or set the bit rate; and of course you can't do mask testing without a mask. All other
measurements work normally. It is possible to edit our mask database to define a type of signal we
didn't include, you can specify the mask as coordinates; then your signal type will be like any other
predefined signal type. The tool for editing the EyeMaskProperties database is
Maskdatabaseeditor.exe, it is installed on your scope. Please see documentation for that program, for
more information.
Description
Values
1000BaseCX
1000BaseLX
1000BaseSX
10G10.4
10G9.9
10GBASELX4
10GbEFEC
10GFCX4
10XFC
10XFCFEC
Clock
Custom
DisplayPort1.62Gbs
DisplayPort2.7Gbs
DVI
FBDIMM3.2Gbs
FBDIMM4.0Gbs
FBDIMM4.8Gbs
FC1063
FC133
FC2125
FC266
FC4250
FC531
FEC10.664
FEC10.709
FEC12.5
FlexRay10.0Mbitss
FlexRay2.5Mbitss
FlexRay5.0Mbitss
1-375
918501 RevA