Teledyne LeCroy WavePro Automation Command - Manual (Page 244)

Automation Command and Query Reference Manual - Control Reference
MASK2FAILURES app.SDA2.EyeMeasure.Mask2Failures
Mask2Failures are the red circle cursors from the simple mask test of the accumulated persistence map in Eye2, that
is enabled by selecting "Show Failures" under EyeMeasure.
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
UseGrid String
Any number of characters Range
The SDA2 software assigns which grid the cursors should appear, so that they are on the same grid
as the Eye diagram they are associated with. The user should not change this setting.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps Action
UseGrid String
View Bool
RESULT app.SDA2.EyeMeasure.Mask2Failures.Out.Result
MASKFAILURES app.SDA2.EyeMeasure.MaskFailures
MaskFailures are the red circle cursors from the simple mask test of the accumulated persistence map in Eye, that is
enabled by selecting "Show Failures" under EyeMeasure.
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
ClearSweeps Action
UseGrid String
View Bool
1-230
918501 RevA