Teledyne LeCroy WavePro Automation Command - Manual (Page 307)

Automation Command and Query Reference Manual - Control Reference
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
RESULT app.SDA2.JitterMeasure.Parameters.Rjsp.Out.Result
RJSPRAW app.SDA2.JitterMeasure.Parameters.RjspRaw
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps Action
View Bool
RESULT app.SDA2.JitterMeasure.Parameters.RjspRaw.Out.Result
TIE app.SDA2.JitterMeasure.Parameters.TIE
TIE, Time Interval Error, is the jitter relative to a recovered or to an ideal clock. When using a PLL to recover the
clock, TIE is the jitter that the PLL did not track. TIE is the basic jitter measurement that is at the beginning of the
process for computing all other jitter parameters. SDA2 can show a track (time aligned trace) of TIE values.
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
ClearSweeps Action
View Bool
1-293
918501 RevA