Teledyne LeCroy WavePro Automation Command - Manual (Page 523)

Automation Command and Query Reference Manual - Processor Reference
PercentileUsed DoubleLockstep
From 0.001 to 20 step 0.001, locked to 1 2 5, fine grain allowed=false, on=false Range
TransitionDensity Double
From 0.1 to 1 step 0.01 Range
UseValInput Bool
UseWeights Bool
INTEGRAL
app.Math.Fx.OperatorYSetup (Operator = "Integral")
Integral of the linearly rescaled (multiplier and adder) input.
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Configure F1 to integrate C1
app.Math.F1.View = True
app.Math.F1.Source1 = "C1"
app.Math.F1.MathMode = "OneOperator"
app.Math.F1.Operator1 = "Integral"
app.Math.F1.Operator1Setup
Example
Adder Double
From -1e-009 to 1e-009 step 1e-012 Range
Sets/Queries the additive A for the integral function Fx, where Fx = M . Input + A.
Description
AutoFindScale Bool
Set/Query the state of the 'AutoFindScale' cvar, which enables the automatic scaling of the Integral
when the acquisition setup changes.
Description
FindScale Action
Initiates an action to find suitable vertical offset and scale for the integral function trace Fx.
Description
Adder Double
AutoFindScale Bool
FindScale Action
Multiplier Double
VerOffset Double
VerScale DoubleLockstep
2-24
918501 RevA