Teledyne LeCroy WavePro Automation Command - Manual (Page 29)

Automation Command and Query Reference Manual - Control Reference
InputB
AverageSweeps Integer
From 1 to 1000000 step 1 Range
Sets/Queries the number of averaging sweeps for input channel Cx. This is distinct from the math
function app.Math.Fx. If the number of sweeps is 1 (the default value), the data will not be averaged.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the number of sweeps for channel C1 to 25.
app.Acquisition.C1.AverageSweeps = 25
Example
AxisXRotation Integer
From -90 to 90 step 1 Range
Sets/Queries the state of the X Axis rotation control, used only in 3-D persistence modes to control the
viewing position. See the general description above for a discussion of the locked and unlocked
persistence modes.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the rotation about the X-axis to 35 degrees for trace C3.
app.Acquisition.C3.AxisXRotation = 35
Example
AxisYRotation Integer
From -90 to 90 step 1 Range
Sets/Queries the state of the Y Axis rotation control, used only in 3-D persistence modes to control the
viewing position. See the general description above for a discussion of the locked and unlocked
persistence modes.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the rotation about the Y-axis to 25 degrees for trace C3.
app.Acquisition.C3.AxisYRotation = 25
Example
1-15
918501 RevA