Teledyne LeCroy WavePro Automation Command - Manual (Page 211)

Automation Command and Query Reference Manual - Control Reference
RiseTime3 Double
From 0 to 2e-009 step 1e-012 Range
When probes are deskewed, this control is set to the measured risetime of Channel 3.
Description
RiseTime4 Double
From 0 to 2e-009 step 1e-012 Range
When probes are deskewed, this control is set to the measured risetime of Channel 4.
Description
Skew1 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
Defines the skew value for Channel 1. Units are in seconds. A positive value has the effect of moving
the trace to the right.
Description
Skew2 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
Defines the skew value for Channel 2. Units are in seconds. A positive value has the effect of moving
the trace to the right.
Description
Skew3 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
Defines the skew value for Channel 3. Units are in seconds. A positive value has the effect of moving
the trace to the right.
Description
Skew4 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
Defines the skew value for Channel 4. Units are in seconds. A positive value has the effect of moving
the trace to the right.
Description
SkewCal1 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
SkewCal2 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
SkewCal3 Double
From -4.5e-007 to 4.5e-007 step 1e-012 Range
1-197
918501 RevA