Ssctrkx – Teledyne LeCroy WavePro Automation Command User Manual
Page 347

Automation Command and Query Reference Manual - Control Reference
VerPos
Double
From -1.5 to 1.5 step (8 digits)
Range
Vertical Position of the trace, normalized to a value between -1.5 and 1.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
VerZoom
Double
From 0.1 to 100 step (8 digits)
Range
Vertical Zoom setting. Locked to a 1, 2, 5 sequence unless VariableVerZoom is set to True .
Description
SSCTRKX
app.SDA2.JitterMeasure.Spectrum.SSCTrkx
SSCTrk1 and SSCTrk2 are selectable from the graphical user interface when the signal type is set to "PCIE
Compliance". We recommend using the higher level controls to enable these results, not (for example)
SSCTrk1.View, because the setup for these functions is not at this level.
AxisXRotation
Integer
From -90 to 90 step 1
Range
AxisYRotation
Integer
From -90 to 90 step 1
Range
This control is used only when Persisted is true and Persistence3d is true. It controls rotation about
the Y axis of the view being persisted.
Description
AxisXRotation
Integer
AxisYRotation
Integer
ClearSweeps
Action
LabelsPosition
String
LabelsText
String
Persist3DQuality
Enum
PersistDotJoined
Bool
Persisted
Bool
Persistence3d
Bool
PersistenceMonoChrome
Bool
PersistenceSaturation
Integer
PersistenceTime
Enum
ShowLastTrace
Bool
UseGrid
String
View
Bool
ViewLabels
Bool
1-333
918501 RevA