Teledyne LeCroy WavePro Automation Command - Manual (Page 648)

Automation Command and Query Reference Manual - Processor Reference
DataFindLevel Action
Causes the engine to find a suitable level for either DataLevells ("Absolute"or "Percent")
Description
DataHysteresis Double
From 0 to 10 step 0.1 Range
Using ParamEngine = "Setup", please refer to the corresponding variable for the Hold Time parameter.
Description
DataLevelIs Enum
Sets/Queries whether the Data signal level is DataAbsLevel or DataPctLevel
Description
Values
Absolute
Percent
PercentGNDMax
PercentGNDMin
PercentPkPk
DataPctLevel Double
From 0 to 100 step 1 Range
Using ParamEngine = "Setup", please refer to the corresponding variable for the Hold Time parameter.
Description
DataSlope Enum
Sets/Queries the polarity of transitions to be used for the Data signal
Description
Values
Both
Neg
Pos
Summary String
Any number of characters Range
Using ParamEngine = "Setup", please refer to the corresponding variable for the Hold Time parameter.
Description
SKEW
app.Measure.Px.Operator (ParamEngine = "Skew")
Calculates the skew between two clock signal waveforms
Clock1FindLevel Action
2-149
918501 RevA