Vanguard VCBA ver.10.xx - Manual (Page 16)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
14
4.2.2. Retrieve Test Records to Directory
The Retrieve Test Records to Directory… option from the Retrieve or File menu can be used to
retrieve one or more records from a CB analyzer to a specific directory on the PC hard drive.
1. Make sure the VCBA software is running. Connect the CB analyzer to the PC via the RS-
232C port and turn on the power.
2. Put the CB analyzer in Computer Interface Mode. Please see section 3.2 for details.
3. From the Retrieve or File menu select Retrieve Test Records to Directory…
4. The following window will appear allowing you to select the location where you would
like to store the retrieved test records:
Browse to the folder where you would like the retrieved records to be stored. Click on
the folder name and then click on the “OK” button.
5. Continue to step 4 from section 4.2.1.