Vanguard VCBA ver.10.xx - Manual (Page 42)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
40
4.11.6. Calculating the Average Velocity From the Graphic Test Results
When viewing the graphic test results, you can view the velocity value at any point by moving
the cursor over the point on the graph. The stroke and velocity value will be displayed at the
top of the screen. You can also calculate the average velocity between two points by using the
steps below:
1. Retrieve the test record that you would like to view (See sections 4.2 and 4.3).
2. Click on the Graph/Results menu to display the graphic test results.
3. Move the cursor to the first point on the travel curve. A vertical hairline will appear at
the cursor location as shown below: