Vanguard VCBA ver.10.xx - Manual (Page 61)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
59
Once you have set the trace colors per the instructions in section 4.11.3, click on the
“OK” button. The following window will be displayed:
16. This dialog box allows you to select which contact, travel, and voltage traces are
displayed in the graphic test results. Please refer to section 4.11.2 for further
information. Once you have input the values per the instructions in section 4.11.2, click
on the “OK” button. The following window will be displayed:
17. Enter the file name for the test plan and click the “OK” button. The test plan will be
saved on the hard drive in the default test plan directory and the details will be
displayed on the screen.
NOTE
You can change the default test plan directory. Please see section 3.4 for
further information.