Vanguard VCBA ver.10.xx User Manual
Page 39
VCBA VERSION 10.xx SOFTWARE MANUAL
REV 2
37
4.11.5. Viewing a Graph Expansion
You can expand a portion of the graphic test results for more accurate analysis. For example, if
you want to view the graph from 0ms to 300ms:
1. Retrieve the test record that you would like to view (See sections 4.2 and 4.3).
2. Click on the Graph/Results menu to display the graphic test results.
3. Move the cursor over the graph area. A vertical hairline will appear at the cursor
location. Also, the bottom of the graph will display the text “T=xx.xx ms” indicating the
current location of the cursor. Move the cursor so that the vertical hairline is at 0ms and
the text at the bottom of the graph reads “T=0.00ms” as shown below:
NOTES
When you move the cursor over a point on the graph, the Stroke and
Velocity values are displayed above the graph, and the Time, Current, and
Voltage are displayed below the graph.