Vanguard VCBA ver.10.xx - Manual (Page 35)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
33
4.11.2. Customizing the Items Displayed on the Graphic Results Screen
You can select which contact, travel, and voltage traces are displayed in the graphic test results.
To select the items to be displayed:
1. Retrieve the test record that you would like to view (See sections 4.2 and 4.3).
2. Click on the Graph/Results menu to display the graphic test results.
3. Click on the Display menu and select Channel Display… The following window will be
displayed:
4. You can customize what items are displayed on each page of the graphic results screen.
Select the page number you would like to customize from the “Page #” drop down list.
5. In each input box, enter the channel number for the item you would like to display. In
the example above, Contact Channels 1, 2, and 3 will be displayed on page 1 of the
graphic results screen along with Voltage Channel 1, Current Channel 1, and Travel
Channel 1. Be sure to enter 0 for all channels you do not want to display.
As another example, if you would like page 2 of the graphic results screen to show
contact channels 4, 5, and 6, click on the “Page #” drop down list and select page 2.
Then under the “Contact (1-24)” heading, enter 4, 5, and 6 in the first 3 boxes. Click on
the “OK” button. Page two of the graphic results screen will now show the traces for
contact channels 4, 5, and 6 while page one will display contact channels 1, 2, and 3.
6. Click on the “OK” button and the graphic test results screen will be updated with the
new settings.