Vanguard VCBA ver.10.xx - Manual (Page 63)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
61
6. If you do not want to save the changes to the test plan at this time, click on the “No” or
“Cancel” button. If you would like to save the changes to the test plan, click on the “Yes”
button. You will then be asked if you would like to overwrite the existing test plan file:
If you would like to overwrite the current test plan file on the hard drive, click on the
“Yes” button. If you would like to provide a different file name, click on the “No” button.
You will be asked to enter a new plan name. Enter the new file name for the plan and
click on the “OK” button. The test plan will be saved with the new file name.
7. You will then be presented with the tabulated test plan information as shown below: