Vanguard VCBA ver.10.xx User Manual
Page 58
REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
56
For example, if you would like the Open Analysis Point #1 value to be 20% of stroke,
click on the “Point #1” drop down list, select “Percent of Stroke” and input 20 in the
input field below the drop down list as shown below:
NOTES
• Contact Point #1 is the distance from the fully closed position to the
position when contact #1 opens.
• Percentage of Stroke is the distance from the fully closed position to
the second analysis point represented as percentage of the total stroke
distance.
• Distance from Close is the user-defined distance from the fully closed
position to the first analysis point.
• Contact #1 + Time is the time to add to Contact #1’s Open position
time. This new position defines an analysis point to calculate velocity.
• Contact #1 – Time is the time to subtract from Contact #1’s Open
position time. This new position defines an analysis point to calculate
velocity.
After you have set the values for both contact points, click on the “OK” button. The
following window will be displayed: