Vanguard VCBA ver.10.xx - Manual (Page 65)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
63
5.4 Retrieving a Test Plan from a CB Analyzer
To retrieve a test plan from a CB analyzer:
1. Make sure the VCBA software is running. Connect the CB analyzer to the PC via the RS-
232C port.
2. The CB analyzer should enter Computer Interface Mode. Please see section 3.2 for
details.
3. Click on the File menu and select Retrieve Test Plan from Timer… The following window
will be displayed:
4. Click on the test plan number that you would like to retrieve. You can select multiple
test plans by clicking on the first plan number and then holding down the [CTRL] key and
clicking on subsequent test plan numbers. You can also select all the test plans by
clicking on the “Select/Deselect All” button. Clicking on the button again will deselect all
test plans.
5. The “File” input field allows you to enter a word that will be used as prefix for the file
name when it is transferred to the PC. When the test plan is transferred to the hard
drive, the file name is in the following format: