Vanguard VCBA ver.10.xx - Manual (Page 36)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
34
4.11.3. Customizing the Graph Colors
The foreground and background color of each Contact, Travel, Current, and Voltage trace can
be customized. To change the trace colors:
1. Retrieve the test record that you would like to view (See sections 4.2 and 4.3).
2. Click on the Graph/Results menu to display the graphic test results
3. Click on the Display Menu and select Graph Color… The following window will be
displayed:
4. From the “Channel” drop down list, select the channel that you would like to set the
graph colors for. From the “Trace Color” drop down list, select the foreground color for
the selected channel. From the “Background” drop down list, select the background
color for the selected channel. You can repeat this process for each channel that you
would like to customize.
5. Select the graph type by clicking either on the “Analog” or “Digital” radio button.
NOTE
A “Digital” graph type will display the contact trace as steps from open to
close. An “Analog” graph type will display the contact trace as an analog
waveform.
6. If you would like to apply the same color settings to all channels, click on the “Apply To
All” checkbox.
7. Click on the “OK” button and the graphic test results screen will be updated with the
new colors.