Vanguard VCBA ver.10.xx - Manual (Page 70)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
68
5.8 Copying a Test Plan to a Different Location
To copy a test plan from one location to another location:
1. From the File menu, click on Setup and then select Copy Test Plan… The following
window will be displayed:
2. If the test plan you would like to copy is not listed in the current directory, click on the
“Path” button at the top of the window and browse to the directory containing the file.
Once you have located the test plan file, click on the file name to select it. You may
select multiple files by holding down the [CTRL] key and then clicking on each
subsequent file name. Once you have selected the test plan file(s) to be copied, click on
the “OK” button. The following window will be displayed:
3. Browse to the folder where you would like the test plan file to be copied to and then
click on the “OK” button. The test plan file will be copied to this directory with the same
file name as the original file.