Vanguard VCBA ver.10.xx - Manual (Page 29)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
27
4.10.2. Printing Tabulated Test Results
To print the tabulated test results:
1. Retrieve the test record that you would like to print (See sections 4.2 and 4.3).
2. If you would like to print the test parameters with the tabulated test results:
• From the File menu click on System Config and then click on System Setup…
The following window will appear:
Make sure the “Print Test Plan” checkbox is checked. If it is not checked, click on
the checkbox and a check mark will appear.
• Click on the “OK” button.
3. Click on the Print menu and select Print Tabulated.
4. Select the printer that you would like to print to and click on the “OK” button. The
tabulated test results will be printed on the selected printer. A typical CB tabulated test
report printout is shown in Figure 2. A typical CB test parameters printout is shown in
Figure 3.