Vanguard VCBA ver.10.xx - Manual (Page 77)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
75
8. Click on the “OK” button. The following window will be displayed:
9. Type the delay time (in milli-seconds) in the input area and click on the “OK” button. The
following window will be displayed:
10. A 5-second timer will count down, and then the test will be initiated. A sequence of
status messages will be displayed, and when the test is complete, the tabulated results
will be displayed in the VCBA software main window. The test record will also be saved
to a file named TEMP001.DAT in the default test record directory.
NOTE
You can change the default test record directory. Please see section 3.4 for
further information.