Vanguard VCBA ver.10.xx User Manual
Page 44
Advertising
REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
42
4.11.7. Manually Overriding Contact Time/Resistor Contact Time or Contact Wipe
You can override the calculated Contact Time, Resistor Time, or Contact Wipe readings in the
tabulated test results. This is a useful feature for situations where a manual calculation is
preferred. For example, in the figure below, the calculated CLOSE time for channel 2 can be
overridden with the preferred time:
To override the calculated CLOSE time with the preferred time for the above example:
1. Retrieve the test record that you would like to view (See sections 4.2 and 4.3). The
tabulated test results will be displayed.
Advertising