Yokogawa EJX210B User Manual

Page 32

Advertising
background image

<7. Operation>

7-4

IM 01C27C01-01EN

2) Creating a provisioning information file

The following provisioned information is stored

in the provisioning information file.

• Network ID

• Device tag

• EUI64

• Join key

• Provisioner (name of the user who performed

provisioning work by FieldMate)

• Date (Time and date when provisioning was

performed by FieldMate)

This provisioning information file is required

to load from the field wireless configurator to

the field wireless integrated gateway. Store

the file carefully.

■ Connecting to a field wireless network
The action after installing the battery pack varies

depending on the silence mode setting.
Mounting the battery pack automatically starts a

search for the field wireless network. When the field

wireless integrated gateway is found, the instrument

enters the join status.

When the field wireless integrated gateway is not

found, the search for the field wireless network

continues.

When the field wireless integrated gateway is not

found and a specified time based on the silence

mode has elapsed, a cycle of a one-hour pause and

six-minute search is repeated until the instrument

can join the field wireless network.

For details on the procedure to switch to silence

mode, refer to subsection 8.3.14 “Switching to

Silence Mode.”

NOTE

If the transmitter searches the Field Wireless

Network for long time at low ambient

temperature condition, sometimes error “AL.70

LOWBAT” is displayed on the Integral Indicator.

Even though using new batteries, it can occur. It

occurs because of battery characteristics. After

joining to the Field Wireless Network, this error

will be cleared within one hour if battery has no

failure.

F0705.ai

Mounting battery pack

Boot

Infrared communication

Pause (b)

Search failure for

the specified time

Infrared

communication

1 hour

passed

Search failure

for 6 minutes

Ready 2:

Searching (b)

(Connect)

(Connect)

Confirm connecting

status: Join (c)

(Publish)

Operation (d)

Deep sleep

setting

(Disconnect)

(Disconnect)

Ready 1:

Searching (b)

Deep sleep (a)

Infrared

communication

Figure 7.5

Wireless Connection Process

(a) Deep sleep

F0706.ai

(b) Ready and pause

F0707.ai

Advertising