Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 104)

72 Network OS NETCONF Operations Guide
53-1003231-02
Overriding Dynamic POD assignments
6
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<tengigabitethernet>
<name>1/0/10</name>
<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete"/>
</tengigabitethernet>
</interface>
</config>
</edit-config>
</rpc>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="722">
<ok/>
</rpc-reply>
4. Issue the <bna-config-cmd> RPC to save the configuration changes by copying the running
configuration to the startup configuration.
NOTE
Do not release a port unless you plan to disconnect the optical link or disable the port persistently.
If you leave the link in a state where the port could be brought online, the POD mechanism will detect
this unassigned port and attempt to reassign it to a port set.