Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 180)

148 Network OS NETCONF Operations Guide
53-1003231-02
Alert notifications
12
<get-config>
<source>
<running/>
</source>
<filter type="subtree">
<system-monitor xmlns="urn:brocade.com:mgmt:brocade-system-monitor">
</system-monitor>
</filter>
</get-config>
</rpc>
<rpc-reply message-id="1103" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<system-monitor xmlns="urn:brocade.com:mgmt:brocade-system-monitor">
<fan>
<threshold>
<marginal-threshold>1</down-threshold>
<down-threshold>2</down-threshold>
</threshold>
<alert>
<state>1</state>
<action>2</action>
</alert>
</fan>
<power>
<threshold>
<marginal-threshold>1</down-threshold>
<down-threshold>2</down-threshold>
</threshold>
<alert>
<state>1</state>
<action>2</action>
</alert>
</power>
<temp>
<threshold>
<marginal-threshold>1</down-threshold>
<down-threshold>2</down-threshold>
</threshold>
</temp>
<cid-card>
<threshold>
<marginal-threshold>1</down-threshold>
<down-threshold>0</down-threshold>
</threshold>
<alert>
<state>1</state>
<action>0</action>
</alert>
</cid-card>
(output truncated)
Alert notifications
The processes in this section configure the alert notifications.