Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 414)

382 Network OS NETCONF Operations Guide
53-1003231-02
Configuring the vLAG ignore split option
26
<rpc-reply message-id="1005" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
3. Start a NETCONF session with RB3.
4. Activate vLAG ignore split for the second leg.
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="1006" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<port-channel>
<name>2</name>
<vlag>
<ignore-split/>
</vlag>
</port-channel>
<port-channel>
<name>3</name>
<vlag>
<ignore-split/>
</vlag>
</port-channel>
</interface>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="1006" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
5. Start a NETCONF session with RB4.
6. Activate vLAG ignore split for the third leg.
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="1007" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<port-channel>
<name>4</name>
<vlag>
<ignore-split/>
</vlag>
</port-channel>
</interface>
</config>
</edit-config>
</rpc>