Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 428)

396 Network OS NETCONF Operations Guide
53-1003231-02
Configuring LLDP global options
27
</rpc-reply>
Advertising the optional LLDP TLVs
To configure the optional LLDP type-length-value (TLV) fields, perform the following steps.
1. Issue the <edit-config> RPC to configure the <protocol> node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the <protocol> node, include the <lldp> node element, which resides in the
urn:brocade.com:mgmt:brocade-lldp namespace.
3. Under the <lldp> node, include the <advertise> node element.
4. Under the <advertise> node, include the <optional-tlv> node element.
5. Under the <optional-tlv> node, include leaf elements enabling the desired optional LLDP TLVs.
These TLVs may include:
• <management-address>
• <port-description>
• <system-capabilities>
• <adv-tlv-system-description>
• <adv-tlv-system-name>
The following example advertises all the optional TLVs.
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="1111" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<protocol xmlns="urn:brocade.com:mgmt:brocade-interface">
<lldp xmlns="urn:brocade.com:mgmt:brocade-lldp">
<advertise>
<optional-tlv>
<management-address/>
<port-description/>
<system-capabilities/>
<adv-tlv-system-description/>
<adv-tlv-system-name/>
</optional-tlv>
</advertise>
</lldp>
</protocol>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="1111" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>