Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 160)

128 Network OS NETCONF Operations Guide
53-1003231-02
Zone configuration scenario
10
NOTE
This operation adds to the defined configuration. It does not replace the defined configuration.
To add a saved configuration to the running configuration, issue the <bna-config-cmd> RPC and set
the input elements as follows:
• In the <src> element, specify the location of the saved configuration you want to restore.
• In the <dest> element, specify “running-config”.
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="212">
<bna-config-cmd xmlns="urn:brocade.com:mgmt:brocade-ras">
<src>https://[email protected]:passphrase/cfg/archiveMay7.txt</src>
<dest>running-config</dest>
</bna-config-cmd>
</rpc>
<rpc-reply message-id="212" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<session-id xmlns="urn:brocade.com:mgmt:brocade-ras">6</session-id>
<status xmlns="urn:brocade.com:mgmt:brocade-ras">in-progress</status>
</rpc-reply>
Zone configuration scenario
FIGURE 3 Zone configuration example
Private Storage
WWN 50:05:07:61:00:09:20:b4
Private Storage
WWN 50:05:07:61:00:22:18:9b
Shared Storage
WWN 50:05:07:61:00:1b:62:ed
Host 1
WWN 20:00:00:05:1e:ed:95:38
Host 2
WWN 20:00:00:05:1e:ed:18:c3
Zone A
Zone B