Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 410

Advertising

378

Network OS NETCONF Operations Guide

53-1003231-02

Configuring a vLAG

The default configuration is to treat FCoE traffic as non-vLAG traffic. This operation must be
performed on every switch in the vLAG.

The following example configures port channel interface 10.

<?xml version="1.0" encoding="UTF-8"?>

<edit-config>

</target>

<port-channel>

</port-channel>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="1001" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

3. Use the <get-port-channel-detail> custom RPC defined in the

urn:brocade.com:mgmt:brocade-lag namespace to verify the port channel details for the local
switch.

<?xml version="1.0" encoding="UTF-8"?>

<get-port-channel-detail xmlns="urn:brocade.com:mgmt:brocade-lag">

</get-port-channel-detail>

</rpc>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1002">

<get-port-channel-detail xmlns="urn:brocade.com:mgmt:brocade-lag">

<lacp>

<aggregator-id>27</aggregator-id>

<aggregator-type>standard</aggregator-type>

<isvlag>false</isvlag>

<aggregator-mode>none</aggregator-mode>

<admin-key>0027</admin-key>

<oper-key>0027</oper-key>

<actor-system-id>00-05-33-6f-18-18</actor-system-id>

<partner-system-id>00-05-1e-cd-6e-9f</partner-system-id>

<system-priority>32768</system-priority>

<partner-oper-priority>32768</partner-oper-priority>

<rx-link-count>4</rx-link-count>

<tx-link-count>4</tx-link-count>

<individual-agg>0</individial-agg>

<ready-agg>1</ready-agg>

<partner-oper-key>0027</partner-oper-key>

<aggr-member>

<rbridge-id>231</rbridge-id>

<interface-type>tengigabitethernet</interface-type>

<interface-name>231/0/22</interface-name>

<actor-port>0xE718160201</actor-port>

</aggr-member>

<aggr-member>

Advertising