Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 402

Advertising

370

Network OS NETCONF Operations Guide

53-1003231-02

Configuring all xSTP on DCB interface ports

operation="delete"/>

<spanning-tree xmlns="urn:brocade.com:mgmt:brocade-xstp">

<restricted-role/>

</spanning-tree>

</tengigabitethernet>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="2039" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Restricting the topology change notification (MSTP)

Use this procedure to restrict the topology change notification BPDUs sent on the interface. By
default, the restriction is disabled. This procedure affects MSTP only.

To restrict the topology change notification BPDUs sent on the DCB interface, perform the following
steps.

1. Issue the <edit-config> RPC to configure the interface node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the <interface> node, include the <gigabitethernet>, <tengigabitethernet>,

<fortygigabitethernet>, <hundredgigabitethernet>, or <port-channel> node element.

3. Under the <gigabitethernet>, <tengigabitethernet>, <fortygigabitethernet>,

<hundredgigabitethernet>, or <port-channel> node element, include the following elements.

a. In the <name> element, specify the interface name in [rbridge-id/]slot/port format or

port-channel number.

b. In the <shutdown> element, include the delete operation in the element tag to enable the

port.

c. Include the <spanning-tree> node element, which resides in the

urn:brocade.com:mgmt:brocade-xstp namespace.

4. Under the <spanning-tree> node, include the empty <restricted-tcn> leaf element.

<?xml version="1.0" encoding="UTF-8"?>

<edit-config>

</target>

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"