Specifying the port priority – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 399

Advertising

Network OS NETCONF Operations Guide

367

53-1003231-02

Configuring all xSTP on DCB interface ports

</target>

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<spanning-tree xmlns="urn:brocade.com:mgmt:brocade-xstp">

</portfast>

</spanning-tree>

</tengigabitethernet>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="2036" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Specifying the port priority

Use this procedure to specify the port priority. The range is 0 through 240 in increments of 16. The
default is 128. A lower number designates a higher priority.

To specify the port priority on the DCB interface, perform the following steps.

1. Issue the <edit-config> RPC to configure the interface node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the <interface> node, include the <gigabitethernet>, <tengigabitethernet>,

<fortygigabitethernet>, <hundredgigabitethernet>, or <port-channel> node element.

3. Under the <gigabitethernet>, <tengigabitethernet>, <fortygigabitethernet>,

<hundredgigabitethernet>, or <port-channel> node element, include the following elements.

a. In the <name> element, specify the interface name in [rbridge-id/]slot/port format or

port-channel number.

b. In the <shutdown> element, include the delete operation in the element tag to enable the

port.

c. Include the <spanning-tree> node element, which resides in the

urn:brocade.com:mgmt:brocade-xstp namespace.

4. Under the <spanning-tree> node, include the <priority> leaf element and specify the port

priority.

<?xml version="1.0" encoding="UTF-8"?>

<edit-config>

</target>

Advertising