Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 563)

Network OS NETCONF Operations Guide 531
53-1003231-02
Performing basic OSPF configuration
34
</target>
<config>
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>101<rbridge-id>
<router>
<ospf xmlns="urn:brocade.com:mgmt:brocade-ospf>
<area>
<area-id>2</area-id>
</area>
<area>
<area-id>1</area-id>
<virtual-link>
<virt-link-neighbor>209.157.22.1
</virt-link-neighbor>
</virtual-link>
</area>
</ospf>
</router>
</rbridge-id>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="2610" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
To configure the virtual link on Device C, establish a NETCONF session with Device C and issue the
following <edit-config> RPC.
<rpc message-id="2611" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>101</rbridge-id>
<router>
<ospf>
<area>
<area-id>0</area-id>
</area>
<area>
<area-name>1</area-name>
<virtual-link>
<virt-link-neighbor>10.0.0.1</virt-link-neighbor>
</virtual-link>
</area>
</ospf>
</router>
</rbridge-id>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="2611" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>