Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1157)

Brocade Network Advisor SAN + IP User Manual 1085
53-1003155-01
Adding a switch to an encryption group
25
The dialog box contains the following information:
• Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
• Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to “Creating a new encryption group” on
page 1045.
FIGURE 470 Add Switch to Existing Encryption Group dialog box
5. Select the group in which to add the switch, then click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to Figure 471 .)