Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 320)

248 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Password policies
6
FIGURE 95 Users dialog box - Policy tab
3. Configure the password expiration by completing the following steps.
a. Enter the maximum number of days that can elapse before a password must be changed
by the user in the Password Age field.
Valid values are 0 through 999. The default is 0, which means the policy is disabled.
b. Enter the number of days to warn the user prior to password expiration in the Warning
Period field.
Only enabled when the Password Age value is greater than zero. Valid values are 0 through
998. The default is 0. The Warning Period value must be less than the Password Age
value.
4. Enter the number of unique passwords you must use before you can reuse a password in the
History Count field.
Valid values are 1 through 24. The default is 1. When you update the History Count value, the
current password history is not cleared.
5. Configure the password format by completing the following steps.
a. Select the Empty Password - Allow check box to allow user accounts to be created or
edited with empty passwords or to allow passwords with any format.
Empty Password is enabled by default.
b. Enter the minimum password length in the Minimum Length field.