Customizing the port health violations widget, Accessing additional data from the widget – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 473
Brocade Network Advisor SAN + IP User Manual
401
53-1003155-01
Monitoring and Alerting Policy Suite/Fabric Watch widgets
8
•
Violation Count — The number of MAPS and Fabric Watch rule violations for the port.
•
CRC Errors — The number of times an invalid cyclic redundancy check error occurs on a port or
a frame that computes to an invalid CRC.
•
Invalid Tx Words — The number of times an invalid transmission word error occurs on a port.
•
Loss of sync — The number of times a synchronization error occurs on the port.
•
Link Failures — The number of times a link failure occurs on a port or sends or receives NOS.
•
Loss of Signal — The number of times that a signal loss occurs in a port.
•
Protocol Errors — The number of times a protocol error occurs on a port.
•
Link Reset — The ports on which the number of link resets exceed the specified threshold
value.
•
C3TXTO — The number of Class 3 discards frames because of timeouts.
•
State changes — The state of the port has changed for one of the following reasons:
-
The port has gone offline.
-
The port has come online.
-
The port is faulty.
•
SFP Current — The amount of supplied current to the SFP transceiver.
•
SFP Receive Power — The amount of incoming laser, in µwatts, to help determine if the SFP
transceiver is in good working condition.
•
SFP Transmit Power — The amount of outgoing laser, in µwatts. Use this to determine the
condition of the SFP transceiver.
•
SFP Voltage — The amount of voltage supplied to the SFP transceiver.
•
SFP Temperature — The physical temperature of the SFP transceiver, in degrees Celsius.
•
SFP Power On Hours — The number of hours the 16 Gbps SFP transceiver is powered on.
•
Refreshed — The time of the last update for the widget.
Network OS Fabric Watch violations with appropriate counter values are displayed for the following
categories. For SAN violations, the following categories display as blank.
•
Abnormal Frame Terminations — The number of frames abnormally terminated.
•
Symbol Errors — The number of undefined or invalid symbols received.
•
IFG (InterFrame Gap) Errors — The interframe gap between successive frames that is violated.
Customizing the Port Health Violations widget
You can customize the widget to display violations for a specific fabric and time frame.
•
To display data for a specific fabric or group, refer to
“Creating a customized network scope”
•
To display data for a specific duration, refer to
•
Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.
Accessing additional data from the widget
•
Right-click a row in the widget to access the shortcut menu available for the associated device.
For more information about shortcut menus, refer to