Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1881)

Brocade Network Advisor SAN + IP User Manual 1809
53-1003155-01
Predefined flow definition templates
44
FIGURE 813 Add Flow Definition - Aggregated Flow template dialog box
Perfom the following steps, in the Add Flow Definition - Aggregated Flow dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
<portname>_<last 4 digits of the source device WWN>.
2. Continue from step 2 through step 6 in “Configuring Static Flow template” on page 1807" to
deploy the flow definition.