Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 277)

Brocade Network Advisor SAN + IP User Manual 207
53-1003155-01
Software Configuration
5
3. Select the EnableVcidThresholdNotification check box to enable notification when the VCID
pool usage crosses a threshold.
4. Enter a threshold percentage for the VCID pool usage in the VcidThresholdPercentage field.
Once this threshold is reached, a trap is generated to notify you that the VCID pool is running
out of IDs.
5. Click Apply or OK to save your work.
Configuring MPLS polling service preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the frequency of MPLS polling in the PollingIntervalInSeconds field.
The minimum is 20 seconds and the maximum is 86,400 seconds (24 hours). The default is
180 seconds.
4. Select the PollingState check box to enable MPLS polling.
5. Click Apply or OK to save your work.
Configuring name service preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the maximum cache size for the DNS Lookup Manager in the DnsCacheSize field.
4. Enter the time (in milliseconds) for the DNS cache to stay in the cache without being accessed
in the DnsCacheTTL field.
5. Enter the time (in milliseconds) interval between each DNS Cache refresh in the
DnsCacheUpdateInterval field.
6. Click Apply or OK to save your work.
Configuring polling service preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Select the EnablePingsForSwitches check box to enable for wired IP devices.
4. Enter the polling interval in seconds in the PollingIntervalInSeconds field.
5. Select the PollingState check box to enable the polling state for IP device health.
6. Click Apply or OK to save your work.