Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 173)

Brocade Network Advisor SAN + IP User Manual 103
53-1003155-01
IP discovery profiles
3
Editing a one-time discovery schedule
To edit a one-time discovery schedule, complete the following steps.
1. Select the time of day you want discovery to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
2. Click the Date list to select a date from the calendar.
3. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
4. To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 102.
Editing an hourly discovery schedule
To edit an hourly discovery schedule, complete the following steps.
1. Select the minute past the hour you want discovery to run from the Minutes past the Hour list.
Where the minute value is from 00 through 59.
2. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
3. To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 102.
Editing a daily discovery schedule
To edit a daily discovery schedule, complete the following steps.
1. Select the time of day you want discovery to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
2. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
3. To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 102.
Editing a weekly discovery schedule
To edit a weekly discovery schedule, complete the following steps.
1. Select the time of day you want discovery to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
2. Select the day you want discovery to run from the Day of the Week list.
3. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
4. To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 102.
Editing a monthly discovery schedule
To edit a monthly discovery schedule, complete the following steps.