Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1158)

1086 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Adding a switch to an encryption group
25
FIGURE 471 Specify Public Key Certificate (KAC) File Name dialog box
6. Enter the location where you want to store the public key certificate that is used to
authenticate connections to the key vault, or browse to the desired location, then click Next.
The Confirm Configuration dialog box displays. (Refer to Figure 472 .) Confirm the encryption
group name and switch public key certificate file name you specified are correct, then click
Next.
FIGURE 472 Confirm Configuration dialog box