Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 291)

Brocade Network Advisor SAN + IP User Manual 221
53-1003155-01
Software Configuration
5
FIGURE 86 Options dialog box (FTP/SCP/SFTP pane)
3. Select the Use External FTP Server and/or SCP Server option.
4. To configure an external FTP server, complete the following steps.
a. Select the FTP Server check box to configure the external FTP server.
All fields are mandatory.
b. Enter the IP address for the remote host in the Remote Host IP field.
c. Enter a user name in the Remote Host User Name field.
d. Enter the path to the remote host in the Remote Directory Path field.
Use a slash (/) or period (.) to denote the root directory.
e. Enter the password in the Password Required for FTP field.
5. To configure an external SCP server, complete the following steps.
a. Select the SCP Server check box to configure the external SCP server.
All fields are mandatory.
b. Enter the IP address for the remote host in the SCP Host IP field.
c. Enter a user name in the SCP Host User Name field.
d. Enter the path to the remote host in the SCP Directory Path field.
Use a slash (/) or period (.) to denote the root directory.
e. Enter the password in the Password Required for SCP field.
f. Select SCP from the Preferred Protocol (Secured) list.
6. To configure an external SFTP server, complete the following steps.
a. Select the SFTP Server check box to configure the external SCP server.
All fields are mandatory.
b. Enter the IP address for the remote host in the SFTP Host IP field.
c. Enter a user name in the SFTP Host User Name field.
d. Enter the path to the remote host in the SFTP Directory Path field.