Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 884
Advertising
812
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
DCB configuration
20
•
IP/Netmask - The netmask is used to divide an IP address into subnets. It specifies which
portion of the IP address represents the network and which portion represents the host,
and can only be configured if the interface mode is L3.
Primary - The primary IP address assigned to a 10 Gbps DCB/FC switch module.
Secondary - The secondary IP address is optional. Secondary IP addresses are helpful
when the interface port is part of multiple subnets.
Advertising