Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1877)

Brocade Network Advisor SAN + IP User Manual 1805
53-1003155-01
Predefined flow definition templates
44
Enter an asterisk (*) to use any port. To select the destination port from a list, refer to
“Selecting an end device port from a list of available device ports” on page 1743".
7. Click Show Details to view information about the Target Switch, Ingress, and Egress ports
based on the selected port.
This data is not editable. Click Hide Details to hide the Target Switch, Ingress, and Egress port
information.
8. Click OK to deploy the flow definition.
The Deployment Status dialog box displays with a list of all defined flows in the Flow Definitions
Status table, as shown is
Figure 809 .
FIGURE 809 Deployment Status dialog box
Table 154 describes the data displayed in the Flow Definitions Status table.
9. Select one or more flow definitions in the Flow Definitions Status table and click Start.
10. View additional details for a deployed flow definition by selecting the flow defintion in the Flow
Definitions Status table.
TABLE 160 Flows Definitions table fields and components
Field and components Description
Name The user-defined name for the flow definition.
Target Switch The switch on which you created the flow definition.
Source The source identifiers defined in the flow definition.
Destination The port number of the destination device defined in the flow definition.
Switch Port The switch port defined in the flow definition.
Progress The progress of the flow (Not Started, In Progress, or Completed).
Status The status of the flow (empty if not started; otherwise, Sucess or Failed).