Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1882)

1810 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Predefined flow definition templates
44
Configuring Frame Type Monitoring template
The Frame Type Monitoring template creates flow rows like Static Flow template with frame types
as shown in
Figure 814 .
FIGURE 814 Add Flow Definition - Frame Type Monitoring template dialog box
Perfom the following steps, in the Add Flow Definition - Frame Type Monitoring dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
<portname>_<last 4 digits of the source device WWN>_<last 4 digits of the destination device
WWN>.
2. Select Frame Type from the list.
3. Continue from step 2 through step 6 in “Configuring Static Flow template” on page 1807" to
deploy the flow definition.