Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 713)

Brocade Network Advisor SAN + IP User Manual 641
53-1003155-01
Configuration file management
14
FIGURE 264 Saved Switch Configurations dialog box
The Saved Switch Configurations table displays the following information:
• Keep check box — Select to keep the associated configuration past the defined age limit.
The configuration will be kept until it is manually deleted, or until the Keep check box is
cleared to enable the age limit again.
• Baseline check box — Select to compare all additional product configuration backup files
to the baseline configuration for deviation. You can view configuration deviation status on
the Status bar of the Management application window.
• Backup Date/Time — The date and time the last backup occurred. This is the backup that
will be restored.
• Name — The name of the switch that will be restored.
• Configuration Type — The type of configuration for the switch (FC, DCB-running, or
DCB-startup).
• IP Address — The IP address of the switch that will be restored.
• WWN — The world wide name of the switch that will be restored.
• Backup Type — The type of backup used to obtain the configuration files from the device.
Backup options include the following types:
- Discovery — The discovery backup is obtained after the discovery process.
- Event Triggered — Occurs when a trap is generated by the device during a
configuration change.
- Manual — Occurs when you launch the Save Switch Configuration dialog box and save
the switch configuration manually.
- Scheduled — Occurs when backup is obtained at the scheduled time.
2. Select the configuration you want to restore, and click Restore.