GW Instek GDS-3000 Series Programming Manual - Manual (Page 12)

GDS-3000 Programming Manual
12
Using the Ethernet Interface
Background The following example will show you how to use
the Ethernet interface to access the scope from a
browser and how to setup the scope as a socket
server for remote control using the National
Instruments Measurement and Automation
Explorer (NI MAX) software. When using the
MAX software the scope is setup to communicate
with the software over a specific port.
Note
For further information about National
Instruments and the NI MAX software, please see
the NI website at www.ni.com.
Panel operation 1. Ensure that your PC and the scope are
connected to the same LAN.
2. Go to Network Connections in the Windows
Control Panel. For example:
Control Panel>Network and Sharing>Manage
Network Connections.
3. Double click on the Local Area Connection icon
that is used by the PC/DSO.