GW Instek GDS-3000 Series Programming Manual - Manual (Page 99)

COMMAND DETAILS
99
Parameter/
Return Parameter EXITs Sets the NoGo condition to when the
input signal exceeds the limit boundary.
ENTers Sets the NoGo condition to when the
input signal stays within the limit
boundary.
Example :GONogo:NGDefine EXITs
Sets the Go/NoGo condition to EXITs.
:GONogo:SOURce
Set
Query
Description Sets the source for the Go/NoGo signal.
Syntax :GONogo:SOURce {CH1|CH2|CH3|CH4|?}
Parameter/
Return Parameter CH1~CH4
Example :GONogo:SOURce CH1
Sets the source to CH1.
:GONogo:VIOLation
Set
Query
Description Sets or returns actions for the Go/NoGo violations.
Syntax :GONogo:VIOLation
{STOP|STOP_Beep|CONTinue|CONTINUE_Beep|?}
Parameter/
Return Parameter STOP The waveform will be frozen.
STOP_Beep The waveform will be frozen and
a beep will be output.
CONTinue Ignore the violation.
CONTINUE_Beep Output a beep, but continue to
monitor the signal.
Example :GONogo:VIOLation STOP
Sets violation action to STOP.