GW Instek GDS-3000 Series Programming Manual - Manual (Page 68)

GDS-3000 Programming Manual
68
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:FRRDelay?
-4.68E-6
Select channel 1 and 2 as source1/2, and then
measure FRR.
:MEASure:FRFDelay
Query
Description Returns the delay between the first rising edge of
source1 and the first falling edge of source2.
Syntax :MEASure:FRFDelay{?}
Return parameter Returns the delay as <NR3>
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:FRFDelay?
3.43E-6
Select channel 1 and 2 as source1/2, and then
measure FRF.
:MEASure:FFRDelay
Query
Description Returns the delay between the first falling edge of
source1 and the first rising edge of source2.
Syntax :MEASure:FRRDelay {?}
Return parameter Returns the FFR delay as <NR3>
Note Select the two source channels before entering this
command.