GW Instek GDS-3000 Series Programming Manual - Manual (Page 55)

COMMAND DETAILS
55
Example :DISPlay:INTensity:GRATicule 5.0E+1
Sets the graticule intensity to 50%.
:DISPlay:PERSistence
Set
Query
Description Sets or queries the waveform persistence level.
Syntax :DISPlay:PERSistence {AUTo| INFInite |OFF|<NRf> | ?}
Parameter <NRf> Range
1.0E-3~1.0E+1, 0.0E+0 100ms~10s, infinite, off
Return parameter Returns the persistence as {AUTO| INFINITE
|OFF|<NR3>}
Example :DISPlay:PERSistence 2.0E+0
Sets the persistence to 2 seconds.
:DISPlay:GRATicule
Set
Query
Description Sets or queries graticule display type.
Syntax :DISPlay:GRATicule {FULL | GRID|CROSs | FRAMe | ?}
Parameter FULL CROSs
FRAMe GRID
Return parameter Returns the graticule type.
Example :DISPlay:GRATicule FULL
Sets the graticule to .
:DISPlay:GRATicule?
FULL
is the current graticule type.