GW Instek GDS-3000 Series Programming Manual - Manual (Page 67)

COMMAND DETAILS
67
Return parameter Returns the voltage or current peak to peak
measurement as <NR3>.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:PK2Pk?
2.04E-1
Selects Channel 1, and then measures the peak-to-
peak amplitude as 204mA.
:MEASure: RMS
Query
Description Returns the root-mean-square voltage/current.
Syntax :MEASure:RMS{?}
Return parameter Returns the RMS value as <NR3>.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:RMS?
1.31E-3
Selects Channel 1, and then measures the root
mean square voltage.
:MEASure:FRRDelay
Query
Description Returns the delay between the first rising edge of
source1 and the first rising edge of source2.
Syntax :MEASure:FRRDelay{?}
Return parameter Returns the delay as <NR3>
Note Select the two source channels before entering this
command.